Keller Digital Pressure Gauges

Keller digital pressure gauges (a.k.a. digital manometers) are a cost-effective solution in any pressure monitoring scenario where a local display is required. Features include min/max display, selectable units, 5 kHz scan rate for transient capture and data recording. These devices can also be built for service in oxygen applications.

These instruments are commonly used as fuel pressure gauges, hydraulic test pressure gauges, water pressure gauges and oil pressure gauges. Almost any installation previously utilizing mechanical or hydraulic pressure gauges can benefit from an upgrade to Keller technology.

Manufactured 100% in-house, Keller products incorporate the latest in microprocessor-based electronics and rugged, weather-proof enclosures, resulting in outstanding performance over a wide temperature range at reasonable cost.

For more information on the best Keller pressure gauge for your application, contact Keller today!

WaterWorld prodcast from ACE 2012 starring Chris Lilly

Chris Lilly discusses Keller level and pressure transmitters with Angela Godwin with WaterWorld. We have had a great deal of success with the AWWA tradeshow and we look forward to next year’s show. Special thanks to WaterWorld and Angela Godwin for the footage!

Video from WEFTEC 2011: Mark Miller discusses Keller America products with WaterWorld magazine

Mark Miller, General Manager for Keller America, spoke with Angela Godwin of WaterWorld  magazine at  WEFTEC 2011.. Mark offered some insight into the Keller organization and on several products that have made Keller a world leader in level and pressure measurement. For more information on which Keller product is appropriate for your application, contact Keller America at 877-253-5537 or email sales@kelleramerica.com.

NEW FROM KELLER: DIGILEVEL SDI-12 SUBMERSIBLE LEVEL TRANSMITTER

Keller now offers the Digilevel, an SDI-12 level transmitter.  This new instrument employs Keller’s proven sensor technology coupled with an SDI-12 serial-digital interface to create a more versatile and valuable tool for environmental level monitoring applications. SDI-12 is a standard communications protocol used to interface microprocessor-based sensors with data recorders for environmental data acquisition.

This convertible instrument may be used for either submersible level or bubbler pressure measurement with user-selectable pressure connection caps. The conical cap is designed to promote automatic cleaning of the sensing diaphragm, helpful where the submersible level transmitter is deployed in high-silt conditions. The alternate bubbler transmitter cap provides a 1/8”NPT female pipe thread for connection to the bubbler apparatus.

The Digilevel is compatible with all SDI-12 v1.3 commands. In addition, it is capable of operating in several emulate modes for popular SDI-12 level/pressure transmitters including manufacturer-specific extended commands. A graphical user interface and Dongle are available options for those who may be unfamiliar with SDI-12 commands.

For more information about the Digilevel, you can view the datasheet here. If you have any questions, please call 877-253-5537 or email sales@kelleramerica.com today.

MODBUS-Based Flow Metering and Pressure Monitoring

The Preciseline Pressure Transducer (manufactured by Keller-America ), not unlike our EtherMeter, offers a digital Modbus-based solution to a water telemetry problem that was previously solved by analog (4-20mA) instrumentation.

Preciseline Pressure Transducer (by Keller-America).

In the case of the Preciseline, the water pressure signal is converted into Modbus; whereas in the case of our EtherMeter, error-free totalization and flow-rate data is collected from a compatible flow meter(s) and converted into Modbus .

As I/O counts grow and instrumentation complexity increases in water plants and pump stations, the addition of smart Modbus sensors is a natural solution that can simplify control system integration challenges.

For example, using a multi-drop Modbus/RTU network, a single shielded cable (+24VDC/Gnd, RS485A/RS485B) can be routed throughout a water plant or pump station to communicate with (and provide power to) an assortment of Modbus-based devices.

As an example, Jersey County Rural Water Company (Jerseyville, IL) recently completed construction of a new pumping station at Godfrey, IL.  The control system at the station features a Modbus/RTU multi-drop network that communicates to 3 Preciseline transducers which monitor station effluent pressure, influent pressure, and the level of water in the ground storage tank.

The same network also includes 2 EtherMeters, which report totalization and flow-rate from 4 flow meters (2 Sensus Omni-T2 meters and 2 Neptune HP Turbine meters).

3 Preciseline pressure transducers and 1 EtherMeter connected to the pump station’s multi-drop Modbus/RTU (RS485) network. The transducers are monitoring effluent pressure, influent pressure, and ground storage tank level. (Click to zoom.)

Had this project been addressed using legacy analog methods, then the aforementioned signals would have required 7 shielded cables connected to an RTU via 3 analog-digital converters and 4 pulse-counting channels.

Therefore, the use of Modbus may significantly reduce the costs associated with wiring, conduit, and instrumentation.  Furthermore, the future addition of other Modbus-based devices is highly simplified.

An EtherMeter-connected, 6″ Sensus Omni-T2 meter. One of four meters in the pump station. (Click to zoom.)

In this application, Jersey County’s potential upgrade plans include tying the 3 variable-speed drives, 3 motorized valves, backup generator, power meter, and Chlorine Monitor into the Modbus network.

Modbus/RTU network schematic. (Click to zoom.)

On 03 Sep 2010, Jersey County Rural Water Co. is hosting a Dedication Ceremony and Open House for the Pump Station featured in this article. The described Modbus flow metering and pressure monitoring technology will be displayed at this event. If interested in attending, please contact Jim Mimlitz at SCADAmetrics (636)938-9633.

For further information on the Preciseline and other Modbus-capable pressure transducers, please contact Chris Lilly at Keller-America (757)596-6680.

[original article located at: https://scadametrics.com/blog/?p=205]

https://scadametrics.com/blog/?p=205

Guide to using Keller Level & Pressure transmitters with the Precision Digital PD865

This guide will help walk you through the configuration required to use a Keller MODBUS-capable level or pressure transmitter with the Precision Digital PD865 display. Jose, from Precision Digital, recently made video using this very same configuration, which you can watch here. Continue reading Guide to using Keller Level & Pressure transmitters with the Precision Digital PD865

Micro-diameter transmitter now available in ranges up to 900ft!

The Keller Microlevel, the smallest diameter submersible level transmitter in its class, is now available in full scale ranges up to 900 feet of water. For applications that demand high pressure, high accuracy, and small size, the Microlevel is the answer.

The data sheet can be downloaded here: https://www.kelleramerica.com/pdf-library/pdf/Microlevel.pdf

Contact Keller America today for more information.

Low-Cost Level Loggers Redefined

new_dcxecoThe days of disposable data loggers are over. Keller proudly presents the answer to throw-away liquid level loggers. The DCX-ECO is a revolutionary product that utilizes accumulator cell technology to provide the ONLY rechargeable autonomous level logger available. The power cell is charged via USB connection during data retrieval. Plus, the DCX-ECO features a small, 18mm (0.71 inch) diameter stainless steel housing, making it ideal for a wide array of long and short term liquid level monitoring applications. It is also the only low cost level logger available in absolute, sealed, AND vented versions that can be ranged to your specific level requirement.

The low priced DCX-ECO uses the same non-volatile memory as the other proven Keller loggers, storing up to 57,000 user-specified data points. The software, Logger 4.X, is intuitive, user-friendly, and available free of charge.